BYMRW - SYNTHETIC GRAPHITE-COPPER IMPREGNATED: GRADE

  • MSDS: BYMRW
  • Manufacturer: POCO GRAPHITE INC
  • Product Name: SYNTHETIC GRAPHITE-COPPER IMPREGNATED: GRADE
  • National Stock Number: 6850-00F046252
Product Identification

Product ID:SYNTHETIC GRAPHITE-COPPER IMPREGNATED: GRADE
MSDS Date:04/15/1994
FSC:6850
NIIN:00F046252
MSDS Number: BYMRW

Responsible Party
POCO GRAPHITE INC
1601 SOUTH STATE STREET
DECATUR, TX 76234-5000
US

Emergency Phone: 817-627-2121

Info Phone: 817-627-2121

Cage: FO975

Contractor
UNION OIL CO OF CA UNION 76 DIV- WESTERN RGION
7600 LOS ANGELES, CA 90017-1443 US

Telephone: 817-627-2121/202-483-7616

Cage: 79003

Ingredients

COPPER (DUST & MIST), BRONZE POWDER *95-4*

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 40-50%

OSHA PEL 0.1 MG(CU)/M3 (FUME)

ACGIH TLV: 0.2 MG/M3 (FUME)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


GRAPHITE (SYNTHETIC)

Fraction By Weight: 50-60%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CERTAIN COPPER COMPOUNDS MAY BE
SEVERE IRRITANTS CAUSING DAMAGE. SKIN: IRRITATION. INHALATION: LOW
DEGREE OF TOXICITY. OVEREXPOSURE TO DUSTS MAY CAUSE
NOSE/THROAT/DIGESTIVE TRACT IRRITATION, AN ALLERGIC SKIN REACTION
& BRONCHITIS. (SEE SUPP)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, STINGING, TEARING, REDNESS,
SWELLING, BURNING, HEADACHE, COUGHING, NAUSEA, DIARRHEA, DIZZINESS,
LOSS OF APPETITE, SHORTNESS OF BREATHE, ABDOMINAL PAIN. HIGH
CONCENTRATIONS: FEVER, CHILLS, SWEATING, NAUSEA & COUGH.
Medical Cond Aggravated by Exposure:SKIN DISORDERS.

First Aid

First Aid:EYES: REMOVE TO FRESH AIR. FLUSH W/WATER. SKIN: THOROUGHLY
WASH W/MILD SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. OBTAIN
MEDICAL ATTENTION IN ALL CASES. NOTE TO PHYSICIAN: IF AN ALLERGIC
REACTION TO THIS MATERIAL DEVELOPS, AVOID ANY FUTHER CONTACT.

Fire Fighting

Extinguishing Media:USE MEDIA APPROPRIATE FOR SURROUNDING AREAS.
Fire Fighting Procedures:WEAR BUNKER GEAR & SCBA. ISOLATE AREA. MOVE
UNDAMAGED CONTAINERS W/O RISK. WATER SPRAY MAY BE USED TO DISPERSE
VAPORS. COOL EQUIPMENT W/WATER W/O RISK.
Unusual Fire/Explosion Hazard:NO UNUSUAL FIRE/EXPLOSION HAZARDS ARE
EXPECTED.

Accidental Release

Spill Release Procedures:STAY UPWIND. ISOLATE AREA. STOP RELEASE W/O
RISK. WEAR APPROPRIATE PROTECTIVE EQUIPMENT INCLUDING RESPIRATORY
PROTECTION. PREVENT ENTRY INTO SEWERS/OTHER WATERWAYS. MINIMIZE
DUST GENERATION. SWEEP UP DUST & PACKAGE APPROPRIATELY FOR
DISPOSAL.

Handling

Handling and Storage Precautions:KEEP AWAY FROM ANY INCOMPATIBLE
MATERIAL. DON'T ENTER CONFINED SPACES SUCH AS TANKS/PITS W/O PROPER
ENTRY PROCEDURES SUCH AS ASTM D-4276.
Other Precautions:CUTTING/MACHINING THIS MATERIAL MAY PRODUCE COPPER
DUSTS. AVOID CONTACT W/EYES & SKIN.

Exposure Controls

Respiratory Protection:IF AIRBORE DUST CONCENTRATIONS ARE EXPECTED TO
EXCEED EXPOSURE LIMITS, A SUITABLE FILTER-TYPE RESPIRATOR SHOULD BE
WORN.
Ventilation:EXHAUST SYSTEMS MAY BE REQUIRED IF EXPOSURE CAN'T BE
MAINTAINED BELOW APPLICABLE LIMITS.
Protective Gloves:REQUIRED
Eye Protection:FACE SHIELD/CHEMICAL GOGGLES
Other Protective Equipment:EYE WASH, QUICK-DRENCH SHOWER FACILITIES,
IMPERVIOUS CLOTHING.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE. WASH THOROUGHLY AFTER HANDLING. PRACTICE GOOD
PERSONAL HYGIEN
Supplemental Safety and Health
BOILING/FREEZING POINT DATA IS FOR COPPER. HEALTH HAZARDS CONT'D:
PNEUMOCONIOSIS DUE TO DEPOSITION OF DUST PARTICLES IN THE LUNGS HAS
BEEN REPORTED WHEN EXPOSED TO CARBON/GRAPHITE-CONTAINING DUSTS.

Chemical Properties

Boiling Pt:B.P. Text:4230F (SUPP
Melt/Freeze Pt:M.P/F.P Text:1980F (SUPP
Spec Gravity:3
Appearance and Odor:GREY TO BLACK SOLID W/SLIGHT COPPER COLOR &
ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMP
Hazardous Decomposition Products:CO2, CO

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. EMPTY CONTAINERS SHOULD BE HANDLED W/CARE IF THEY
CONTAIN A DUST RESIDUE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.